Fluid Power Training Systems: MF101 SERIES SIMULATOR
The quintessential setting for teaching, and learning hydraulics, would be to set up a classroom in a manufacturing facility for a few weeks where students study industrial hydraulics, and then move the classroom to a construction site for a few weeks where they could study mobile hydraulics.
For a student to gain maximum comprehension of hydraulics, he/she MUST learn in an environment wherein the theory is exceptionally well presented, and the lab activities are executed on a variety of hydraulic systems, which are capable of operating through complete “load-cycles.”
FPTI™ created this quintessential learning environment - the MF101 series hydraulic training simulator!
What sets the MF101 and MF100 series hydraulic training simulators apart from all other simulators, is their unique ability to replicate a fully functional industrial or mobile hydraulic system, which is capable of operating with or without load, and that’s not all!
The MF101 series simulators have an unprecedented six (6) directional control valves – three (3) with open flow paths in neutral, and three (3) with closed flow paths in neutral – students can construct systems with complexity equal to, and in many cases greater than, those found in typical industrial and mobile machinery.
In addition, the MF101 and MF100 series simulators achieve yet another remarkable milestone in simulator design – a single simulator has the onboard capability to operate in fixed displacement, pressure-compensated, and pressure and flow (*load-sensing) pump environments (*optional).
Add the numerous additional unique features, and you’ll quickly discover that these FPTI™ simulators are the most advanced in the world for both teaching, and learning, hydraulics.
MF101 SERIES MODELS AVAILABLE:
| MODEL # |
DESCRIPTION OF SIMULATOR |
MORE INFORMATION
|
| MF101S-PH |
Single-sided Practical Hydraulics simulator |
CLICK HERE
|
| MF101D-PH |
Double-sided Practical Hydraulics simulator |
CLICK HERE
|
| MF101S-TS |
Single-sided Troubleshooting Hydraulics simulator with manual fault-entry |
CLICK HERE
|
| MF101D-TS |
Double-sided Troubleshooting Hydraulics simulator with manual fault-entry |
CLICK HERE
|
| MF101S-TSE |
Single-sided Electronic Troubleshooting Hydraulics simulator with Touch-screen fault-entry |
CLICK HERE
|
| MF101D-TSE |
Double-sided Electronic Troubleshooting Hydraulics simulator with Touch-screen fault-entry |
CLICK HERE
|
|
|
Support Frame and Hardware:
High-strength steel, welded construction. Finished with high quality powder coating. The component mounting panel is made of aluminum plate.
Safety Features:
All moving parts are protected by transparent covers. Dual pre-set, redundant relief valves are located in the power unit. Cautions and warnings are applied where necessary. All hose connections are made via flat-face quick-disconnect couplers. Safety glasses are required when operating or observing the operation of this simulator.
|
|
User Friendly:
Attend one of our seminars and learn how to use this dynamic teaching aid. You will receive, with the simulator, the complete workshop program on CD-Rom in PowerPoint™ format, instructor’s manual, and student workbooks. Become immediately effective at presenting a polished presentation. Spend your valuable hours in front of the class, not in front of the copier!
|
|
|
Standard Features:
 |
One (1) horsepower TEFC; C-face electric motor; 120V single-phase; 1750 RPM; full-load amps - ten (10) |
|
Directional control valve - Solenoid operated (tandem-center) |
|
Three (3) glycerine-filled, Bourdon tube-type pressure gauges; 0 – 1000 PSI (0 - 69 bar) |
|
Directional control valve - Solenoid operated (closed-center) |
|
Flat-face quick-couplers |
|
Directional control valve - Hand-lever operated (open-center) - QTY 2 |
|
Bi-directional, loadable hydraulic motor with safety cover |
|
Directional control valve - Hand-lever operated (float-center) - QTY 2 |
|
Flow control valve |
|
Six (6) “T” assemblies with “zero-leak” quick-connect/disconnect fittings |
|
Pilot-operated relief valve with remote option |
|
Two (2)-joystick controllers for solenoid-operated valves |
|
Direct-operated relief valve |
|
Double-acting, single-rod cylinder |
|
Sequence valve |
|
Double-acting, double-rod cylinder with load/no-load capability |
|
Counterbalance valve with integral reverse flow check valve |
|
Integrated load (100 lbs./45.4 kg) with solenoid-operated load engagement mechanism |
|
Pressure reducing valve |
|
Two (2) in-line flow meters – 2.0 GPM (7.57 Lpm) |
|
Check valve |
|
Digital tachometer records hydraulic motor RPM |
|
Needle valve |
|
Electronic stopwatch with auto retract |
|
Ball Valve |
|
Ammeter – analog |
|
Pressure-compensated flow control valve - Restrictor type |
|
Return-line, spin-on/off filter with by-pass indicator |
|
Pressure-compensated flow control valve - Bypass type |
|
Dual safety relief valves |
|
All trainers, books & CD-Rom conform to metric system |
|
All graphic symbols conform to ISO/ANSI standards |
CD's included with the purchase of a simulator include:
|
Basic Hydraulic Laws & Principles
|
|
Working Safely with Hydraulics
|
|
Pressure Control Valves
|
|
Hydraulic Pumps
|
|
Check Valves, Accumulators, and Actuators
|
|
Reservoirs, Coolers, Hoses, and Connectors
|
|
Directional Control Valves - Mobile and Industrial
|
|
Flow Control Valves and Flow Dividers
|
|
Proactive Maintenance & Filtration
|
|
How To Interpret Fluid Power Symbols - Interactive CD-Rom Presentation |
|
An Introduction to Closed-Loop Oil Systems |
|
Practical Trainer Activities/Troubleshooting Trainer Activities (depending on model purchased)
|
Guarantee:
Our simulators are guaranteed to be free of defects in material and workmanship for up to two years from date of purchase. The components used on these trainers are covered by their respective manufacturers warranty.
|
Contact the FPTI™ for a no-obligation proposal, toll free - 1-888-222-3421
|
