The MF100-SVM-TS module is designed to teach students how to pin-point a potential leakage path inside a "stack" in a matter of minutes using the pressure/leak technique - with the power-unit safely locked out!
The MF100-SVM-TS Stacked Valve module (with diagnostics package) will aid instructors in teaching students the following:
| 1. |
Test for leakage between the spool and bore in cases where an actuator (cylinder or motor) is drifting. |
| 2. |
Test for leakage between the spool and bore in cases where a motor circuiut is losing power and overheating when the directional control valve is activated. |
| 3. |
Isolate a leakage problem to determine if its source is between the spool and bore and/or one or more of the circuit modules. |
| 4. |
Test for excessive leakage across the integral main pressure relief valve. |
The MF100-SVM-TS Stacked Valve module is equipped with the following:
| 1. |
Sub-plate 03 size. |
| 2. |
Pressure relief valve in a circuit module configuration. |
| 3. |
Cylinder port relief valve in a circuit module configuration. |
| 4. |
Dual, adjustable one-way flow control valves in a circuit module configuration. |
| 5. |
Dual, pilot-operated check valves in a circuit module configuration. |
| 6. |
Directional control valve |
| 7. |
Convenient, integrated spare O-ring holder. |
| 8. |
Five (5) troubleshooting "fault" switches. |
| 9. |
24VDC cord with plug-in receptacle. |
| 10. |
Power ON/OFF light (illuminated when power is on). |
|
